If you are stuck to the same room router, you are receiving pretty good signals, but what if you are in another room? Signals may drop, or walls might become a barrier in the pasture of Internet connectivity. But there is still hope that we can boost the speed of our existing network, even if you have bulky homes, thick walls, etc. You can still access the Internet from one room to another even during your Netgear wifi Extender Setup; no fence can stop you from making a successful end and keeping devices connected.
5 ways to Netgear wifi extender setup Internet coverage
#1. Make your Router rid of other Wireless Devices
Suppose you have other wireless devices with the same frequency as routers, like cordless phones, monitors, security alarms, etc. In that case, we suggest that our users move their devices somewhere else (away from the Router) where they don’t want an Internet connection. While if there is no place for something like that, turn all the third-party wireless devices off during wifi usage and throughout the Netgear wifi extender setup.
Netgear Genie is the most powerful application that can quickly dash on any desktop. It is also beneficial to repair the damaged (low connectivity) network and manage features like guest access and parental control. This app becomes a protective shield that defends your network from intruders. You have to connect your range extender with the help of an Ethernet cable to any of your smart devices. After that, launch a web browser. In the address bar, type my wifi ext to know more about Netgear wifi extender setup features and make your configuration successful between your devices.
#2. Shift your device
Do you know wireless signals can also be corrupted by moving through walls, solid objects, and other metal appliances? So if you have placed the Router closer to them, it’s time to shift your device out of their reach of them. We are suggesting this because there are chances that a time will come when Who can degrade your wifi signals.
The best spot to place your Router is the center of your house, free from walls and other obstacles. The signal of your device hates to make a connection with electronic gadgets. Reposition your device by raising it higher and off the ground.
#3. Switch to a Range Extender
If you have a big house or a bungalow, buy a range extender to get more speed on the Internet that will follow you at every inch of your house. This wifi device of yours gives you a good quality signal strength even in areas declared as dead zones. It is better to place your device near your Router; once you configure them both, you can move your extender to its intended location and experience the high-quality Internet from doorstep to backyard.
#4. Amend the frequency of your Router
It may interest you to know that your device is the answer to your entire dilemma. Don’t believe it? But it is true. Most people don’t care about router settings and must be aware of the router administration page. Most routers have common channels, those channels do not overlap and give you the best signals, but most are set by default, which means your device may receive and send poor signals. In that case, try the power cycling process to see whether your device’s signals are improving.
#5. It would help if you had an External Antenna
We can only move the devices from one place to another sometimes, everywhere. But on the other hand, most of the routers support external antennas. If your device is fixed into the desk or cupboard, external antennas would be a great way of receiving the broadcast signals for better performance. Omnidirectional antennas are adjustable in all directions to gain high signals of wifi range everywhere. If your Router is on the one side, this antenna can be a gateway to boost up the speed of your existing signal strength.
Read More:- 5 Top Tips To Reduce Your Cyber Security Risk